No drilling
Wall holder for electric toothbrush — upright and dry, no drilling
A clear wall holder that sticks on without drilling and keeps an electric toothbrush upright, head up. A hole in the base lets the charging cable through. It does not store spare heads. Single or pair. Shipped by our logistics partner, tracked delivery in 7 to 12 working days.
Compatible with:Electric toothbrushes with a straight handleHandle base under 5 cm wide (outer width of the holder)Does not take a charging base or spare heads
€20,99
i.e. €10,49 per holder
🔒 Secure payment
📦 Tracked parcel, real delivery time shown
↩️ 30-day returns
Before you buy
Who it's for, and who it isn't
It's for you if
- You want to clear the edge of the basin and keep the brush upright and dry
- You rent or do not want to drill the tiles
- There are two of you at home: one holder each
Skip it if
- Your brush charges on an induction base: the base does not fit in the holder
- Your wall is textured or has fragile paint: the adhesive holds poorly
- You also want to store spare heads
Compare the packs
The bigger the pack, the less each unit costs
| Pack | Price | Price per holder |
|---|---|---|
| Single | €14,99 | €14,99 |
| Pack of 2 | €20,99 | €10,49 |
In detail
Everything about this product
Left on the edge of the basin, an electric toothbrush ends up splashed, or on the floor. This clear holder sticks to the wall and keeps it upright, within easy reach, without drilling the tiles.
What you get
- 1 or 2 clear plastic holders, each with its adhesive plate
- About 10.5 cm high and 5 cm wide, according to the supplier’s diagram
- A hole in the base for the cable of a toothbrush that charges by cable
- Load stated by the supplier: up to 2 kg
Fitting it properly
Choose a smooth, clean surface: tiles, glazed tiles, glass or mirror. Wipe it, peel off the adhesive film, press firmly, then wait 12 hours before putting the brush in, as the supplier advises.
What it does not do
Each holder takes a single handle: there is no room for spare heads or for an induction charging base. For heads, see our storage box; for travel, our electric toothbrush case.
Shipped by our logistics partner: tracked delivery in 7 to 12 working days. Free delivery in France from €10, 30-day returns.
| Material | clear plastic |
|---|---|
| Size | about 10.5 × 5 cm (supplier’s diagram) |
| Mounting | adhesive plate, no drilling |
| Stated load | up to 2 kg (according to the supplier) |
| Cable | hole in the base for the charging cable |
| Pack | 1 or 2 holders |
How to use
How to use it
- Wipe and dry the surface (tiles, glass or mirror)
- Peel the protective film off the adhesive plate
- Stick the holder on and press firmly for a few seconds
- Wait 12 hours before putting the brush in
Often bought together
What goes with it
The winning duo
And your toothpaste?
An accessory does half the job, the toothpaste does the other half: Anti-Coffee Stains, 1450 ppm fluoride and peroxide-free, completes this routine.
Frequently asked questions
Will my toothbrush fit?
The holder is about 5 cm wide on the outside, according to the supplier’s diagram, and takes a straight electric toothbrush handle standing upright. Measure the base of your handle: if it is close to 5 cm, the fit is not guaranteed.
Can I charge the brush in it?
Only if it charges by cable: a hole in the base lets the cable through. An induction charging base does not fit in the holder.
Which surface should I stick it on?
A smooth, clean surface: tiles, glass, mirror. Wipe, stick, press firmly and wait 12 hours before putting the brush in. On textured walls or fragile paint, the adhesive holds poorly.
Does it store spare heads?
No, each holder takes a single handle. For heads, see our toothbrush head storage box; for travel, our electric toothbrush case.
How long is delivery?
The item is shipped by our logistics partner: tracked delivery in 7 to 12 working days. Free delivery in France from €10, 30-day returns.