Sold outNew
Stainless
Stainless steel wall holder for brush and upturned cup, no drilling
A small stainless steel wall clip: the brush slides into the bottom notch, head up, and a cup sits upside down on the loop to dry. It sticks to tiles with no drilling and is barely 8 cm high. Single or pack of 2, one per person.
9,90 €
Secure payment
Tracked parcel, real delivery time shown
30-day returns
Often bought together
-
This itemStainless steel wall holder for brush and upturned cup, no drilling
9,90 €
-
Classic Mint
9,99 €
-
Magnetic wall rinse cup, hangs upside down to dry
11,90 €
Before you buy
Who it's for, and who it isn't
It's for you if
- You want a brush and a cup kept dry without losing space
- You prefer metal to plastic in the bathroom
Skip it if
- Your walls are painted or rough: the adhesive will hold poorly
- You want a cup included: see our wall holder with cup
Compare the packs
The bigger the pack, the less each unit costs
| Pack | Price | Price per holder |
|---|---|---|
| Single | 9,90 € | 9,90 € |
| Pack of 2 | 11,90 € | 5,95 € |
In detail
Everything about this product
A brush lying on the edge of the basin sits in splashes, and an upright cup keeps water at the bottom. On the wall, the brush dries standing and the cup drains upside down, in less than 4 cm of width.
Fitting
Clean and dry the tiles, peel the film off the adhesive, press firmly for about thirty seconds, then wait a few hours before adding the brush and cup. The cup is not included: the loop takes most upturned bathroom cups.
Read more and specifications
Specifications
| Contents | 1 or 2 holders, cup not included |
|---|---|
| Material | brushed stainless steel |
| Dimensions | 7.9 × 4 cm, loop 5.8 cm high, 2.8 cm deep |
| Mounting | adhesive, no drilling |
Delivery and returns
Shipped by our logistics partner, tracked delivery in 7 to 12 working days. Free delivery in France from €20, returns accepted for 30 days.
| Contents | 1 or 2 holders, cup not included |
|---|---|
| Material | brushed stainless steel |
| Dimensions | 7.9 × 4 cm, loop 5.8 cm high, 2.8 cm deep |
| Mounting | adhesive, no drilling |
| Shipping | logistics partner, tracked delivery in 7 to 12 working days |
Product safety
- Product
- Stainless steel wall holder for brush and upturned cup, no drilling (1 holder)
- Manufacturer
- Third-party manufacturer (generic, unbranded item). Manufacturer's name and address available on request: contact@eclatdent.fr
- Seller responsible in the EU
- Noa HEIDMANN, ÉclatDent (sole trader), 123 rue Saint-Théodore, 57700 Hayange, France · contact@eclatdent.fr
- Warnings
- Read the instructions and the advice on this page before use. Keep out of reach of young children. If you notice pain, bleeding or irritation, stop using it and ask a dentist.
A question about the safety of this product, or an incident to report: contact@eclatdent.fr
Often bought together
What goes with it
The winning duo
And your toothpaste?
An accessory does half the job, the toothpaste does the other half: Classic Mint, 1450 ppm fluoride and peroxide-free, completes this routine.
Frequently asked questions
Does it hold without drilling?
Yes, on a smooth, clean and dry surface (tiles, glass, ceramic). Wait a few hours before loading it. It holds poorly on painted or rough walls.
Does an electric toothbrush fit in the notch?
Yes for slim handles, as in our photos. A very wide handle may not fit: the gap between the two rods is 3 cm.
How long is delivery?
Shipped by our logistics partner, tracked delivery in 7 to 12 working days. Delivery is free in France from €20 and returns are accepted for 30 days.
Stainless steel wall holder for brush and upturned cup, no drilling