Sold outNew
Adjustable grips
Adjustable wall holder for electric toothbrushes, silicone base
A holder that sticks to the wall and keeps an electric toothbrush upright, head up. Two sliding grips open from 24 to 35 mm to hold the handle, and the base sits in a non-slip silicone cup. The basin stays clear and the brush dries in the air. Four colours.
8,90 €
Secure payment
Tracked parcel, real delivery time shown
30-day returns
Often bought together
Before you buy
Who it's for, and who it isn't
It's for you if
- Your electric toothbrush lies around on the edge of the basin
- You want one holder per person, each in their own colour
- You do not want to drill the tiles
Skip it if
- Your brush handle is more than 35 mm wide
- You want a holder that charges the brush: this one does not
- Your wall is roughcast or porous paint: the adhesive holds poorly
In detail
Everything about this product
Left on the edge of the basin, an electric toothbrush ends up in a puddle, head against the rim. On the wall, it stays upright and dry between brushings. This holder grips the handle with two pinches you set to its width, and stands it in a silicone cup that does not slip.
Fitting it
Clean and dry the wall, stick the supplied adhesive pad to the back of the holder, press firmly for about thirty seconds, then wait a few hours before putting the brush in. A smooth surface, tiles or glass, holds better than painted plaster.
Read more and specifications
Which brush?
The grips open from 24 to 35 mm according to the supplier’s photo: that is the handle width to measure, at grip height. The holder only holds the brush; it does not charge it, the charger stays where it is.
Specifications
| Contents | 1 holder and its adhesive pad |
|---|---|
| Material | ABS plastic, non-slip silicone cup |
| For | handles 24 to 35 mm wide (adjustable grips) |
| Mounting | adhesive, no drilling |
| Colours | white, black, pink or blue |
Delivery and returns
Shipped by our logistics partner, tracked delivery in 7 to 12 working days. Free delivery in France from €20, returns accepted for 30 days.
| Contents | 1 holder and its adhesive pad |
|---|---|
| Material | ABS plastic, non-slip silicone cup |
| For | handles 24 to 35 mm wide (adjustable grips) |
| Mounting | adhesive, no drilling |
| Colours | white, black, pink or blue |
| Shipping | logistics partner, tracked delivery in 7 to 12 working days |
Product safety
- Product
- Adjustable wall holder for electric toothbrushes, silicone base (White)
- Manufacturer
- Third-party manufacturer (generic, unbranded item). Manufacturer's name and address available on request: contact@eclatdent.fr
- Seller responsible in the EU
- Noa HEIDMANN, ÉclatDent (sole trader), 123 rue Saint-Théodore, 57700 Hayange, France · contact@eclatdent.fr
- Warnings
- Read the instructions and the advice on this page before use. Keep out of reach of young children. If you notice pain, bleeding or irritation, stop using it and ask a dentist.
A question about the safety of this product, or an incident to report: contact@eclatdent.fr
Often bought together
What goes with it
The winning duo
And your toothpaste?
An accessory does half the job, the toothpaste does the other half: Classic Mint, 1450 ppm fluoride and peroxide-free, completes this routine.
Frequently asked questions
Will my brush fit?
Measure the handle width halfway up: between 24 and 35 mm, the grips hold it. Most round or oval sonic brushes are in that range, but check yours.
Can it be removed?
Yes, by gently pulling the adhesive pad downwards, parallel to the wall. To fit it elsewhere you need a new double-sided pad.
How long is delivery?
Shipped by our logistics partner, tracked delivery in 7 to 12 working days. Delivery is free in France from €20 and returns are accepted for 30 days.
Adjustable wall holder for electric toothbrushes, silicone base